Crow Runner Link Manual do Utilizador descarregar pdf (Página 10)

RUNNER LINK Gateway Installing the Unit

Table 1 LED Description Table

LED Description

Fail Solid Red when pressing the Config button or when there is an error.

Net Solid green when finding the network.

Sys Blinks green when the bus is active.

3. Connect the other end of the Bus cable onto the board as shown in Figure 3.

Power is supplied to the board via the Bus cable and the red LED is lit.

Using the Bus Terminal Block

You can also connect discrete wires as shown in the figure below. See also Figure

2 and

Figure 3.

The LIN terminal is NOT used.

Figure 4 Using the Bus Terminal Block

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Sem comentários

Crow Runner Link Manual do Utilizador Página 10